 |
|
| ¡¡¡¡¡¡ |
|
|
|
 |
| |
No.2039, Laifang Road, Hi-tech Park, Songjiang District
Tel: 021-67697256 (office)
Fax: 021-67697257 |
|
|
 |
---Solid Lubricating Bearing |
¡ô Your current location£ºhome > Product Introduction |
|
| |
| ¡ò Solid lubricating bearing (CuSn12) |
|
The product adopts tin bronze as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is applicable to low-loading, high-temperature and medium-speed occasions, such as non-lubricating parts of construction machinery, metallurgical machinery and conveying machinery etc. |
Performance Index |
Relevant Data |
Maximum loading pressure |
40N/mm2 |
Applicable temperature scope |
2500¡æ |
Highest sliding velocity |
0.4m/s |
Rigidity |
> 90 |
Friction coefficient |
< 0.16 |
Allowed Highest PV value |
0.8N/mm2.m/s |
|
|
| |
| ¡ò Solid lubricating bearing (F) |
|
The product adopts cast iron as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is a typical material-saving product, which can greatly reduce costs and meet the application requirements. The product is used in automobile moulds and mould frame of injection molding machine. |
Performance Index |
Relevant Data |
Maximum loading pressure |
70N/mm2 |
Applicable temperature scope |
400¡æ |
Highest sliding velocity |
0.5m/s |
Rigidity |
> 180 |
Friction coefficient |
< 0.17 |
Allowed Highest PV value |
0.8N/mm2.m/s |
|
|
| |
| ¡ò Solid lubricating bearing (SUS304) |
|
The product adopts stainless steel as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and has higher extrudability; the product is applicable to occasions such as windlass brace and crane brace etc. |
Performance Index |
Relevant Data |
Maximum loading pressure |
70N/mm2 |
Applicable temperature scope |
400¡æ |
Highest sliding velocity |
0.3m/s |
Rigidity |
> 150 |
Friction coefficient |
< 0.17 |
Allowed Highest PV value |
0.6N/mm2.m/s |
|
|
| |
| ¡ò Solid lubricating bearing (S45C) |
|
The product adopts 45# steel as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and has higher compressive property; the product is applicable to occasions such as automobile moulds etc. |
Performance Index |
Relevant Data |
Maximum loading pressure |
100N/mm2 |
Applicable temperature scope |
400¡æ |
Highest sliding velocity |
0.4m/s |
Rigidity |
HRC > 45 |
Friction coefficient |
< 0.16 |
Allowed Highest PV value |
2.5N/mm2.m/s |
|
|
| |
| ¡ò Solid lubricating bearing (ECR15) |
|
The product adopts alloy tool steel as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and has higher compressive property; the product is applicable to occasions such as automobile moulds and rooter etc. Due to the steel matrix, the product shall not be used in water, acid or alkaline occasion. |
Performance Index |
Relevant Data |
Maximum loading pressure |
250N/mm2 |
Applicable temperature scope |
350¡æ |
Highest sliding velocity |
0.1m/s |
Rigidity |
HRC > 60 |
Friction coefficient |
< 0.17 |
Allowed Highest PV value |
1N/mm2.m/s |
|
|
|
 |
|
|
