User Name:
Password:
¡¡¡¡¡¡
   
¡ö Antifriction Plastic Bearing
¡ö Bimetal Bearing
¡ö Copper alloy rolling bearings
¡ö Solid Lubricating Bearing
¡ö Technical Standards
 
October 1992: Nuclear Industry South China 249 Bearing Factory (the predecessor of Hewei) was established in Pucheng of Fujian.
June 1995: products were exported to United States
December 1995: approved by ISO9002 Quality Certificate
July 1998: products began to support and match with motor industry
April 2002: moved to Jiuting Development Zone in Songjiang of Shanghai through technological transformation
December 2002: approved by ISO9000 Quality System Certificate
December 2007: began to start up TS16949 System Certificate procedures
 
No.2039, Laifang Road, Hi-tech Park, Songjiang District
Tel: 021-67697256 (office)
Fax: 021-67697257
¡ö
---Solid Lubricating Bearing ¡ô Your current location£ºhome > Product Introduction
 
¡ò Solid lubricating bearing (H1)
The product adopts specially formulated high-pressure brass as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is widely used in continuous casting rolling mill, mining machinery, ships, and gas turbine etc.

Performance Index

Relevant Data

Maximum loading pressure

100N/mm2
Applicable temperature scope

300¡æ
Highest sliding velocity

0.5m/s
Rigidity

> 210

Friction coefficient

< 0.16

Allowed Highest PV value

1.65N/mm2.m/s
 
¡ò Solid lubricating bearing (H2)
The product adopts specially formulated high-intensity copper alloy as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is widely used in continuous casting rolling mill, mining machinery, ships, and gas turbine etc.

Performance Index

Relevant Data

Maximum loading pressure

100N/mm2
Applicable temperature scope

300¡æ
Highest sliding velocity

0.4m/s
Rigidity

> 235

Friction coefficient

< 0.15
Allowed Highest PV value

1.65N/mm2.m/s
 
¡ò Solid lubricating bearing (H3)
The product adopts specially formulated high-intensity copper alloy as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is widely used in continuous casting rolling mill, mining machinery, ships, gas turbine, injection molding machine and automobile moulds etc.

Performance Index

Relevant Data

Maximum loading pressure

100N/mm2
Applicable temperature scope

300¡æ
Highest sliding velocity

0.4m/s
Rigidity

> 260

Friction coefficient

< 0.15
Allowed Highest PV value

1.65N/mm2.m/s
 
¡ò Solid lubricating bearing (AL)
The product adopts aluminum bronze as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is mainly used in medium-loading, high-temperature and medium-speed occasions.

Performance Index

Relevant Data

Maximum loading pressure

50N/mm2
Applicable temperature scope

400¡æ
Highest sliding velocity

0.25m/s
Rigidity

> 160

Friction coefficient

< 0.16

Allowed Highest PV value

1.25N/mm2.m/s
 
¡ò Solid lubricating bearing (B)
The product adopts tin bronze as matrix, inlays specially formulated solid lubricants on the surface according to a certain angle and density, and is formed by precision machining. The product is mainly applicable to common occasions, such as light industry machinery, machine tool industry, oven raceway and fireplace door etc.

Performance Index

Relevant Data

Maximum loading pressure

40N/mm2
Applicable temperature scope

250¡æ
Highest sliding velocity

0.4m/s
Rigidity

> 60

Friction coefficient

< 0.15
Allowed Highest PV value

1.0N/mm2.m/s
 
 
All rights reserved: Shanghai Hewei Sliding Bearing Manufacture Co.,Ltd
Add: No.2039, Laifang Road, Hi-tech Park, Songjiang District, Shanghai
Tel: 021-67697256 (office)¡¡¡¡Fax: 021-67697257¡¡¡¡E_mail£ºhws@he-wei.com¡¡¡¡Shanghai ICP Recorded No. 05044377